Subcooling in PCM emulsions: Part 2: Interpretation in terms of nucleation theoryGÜNTHER, Eva; LI HUANG; MEHLING, Harald et al.Thermochimica acta. 2011, Vol 522, Num 1-2, pp 199-204, issn 0040-6031, 6 p.Article

Thermal conductivity and phase-change properties of aqueous alumina nanofluidTENG, Tun-Ping.Energy conversion and management. 2013, Vol 67, pp 369-375, issn 0196-8904, 7 p.Article

Study on thermal properties of phase change material by an optical DSC systemWANG, Hai-Yan; LU, Shu-Shen.Applied thermal engineering. 2013, Vol 60, Num 1-2, pp 132-136, issn 1359-4311, 5 p.Article

Two-phase cooling of light emitting diode for higher light output and increased efficiencyYE, H; MIHAILOVIC, M; WONG, C. K. Y et al.Applied thermal engineering. 2013, Vol 52, Num 2, pp 353-359, issn 1359-4311, 7 p.Article

Experimental investigation of pump-assisted capillary phase change loopJIANG, C; LIU, W; WANG, H. C et al.Applied thermal engineering. 2014, Vol 71, Num 1, pp 581-588, issn 1359-4311, 8 p.Article

Modeling and simulation of transpiration cooling with phase changeFEI HE; JIANHUA WANG; LUCHENG XU et al.Applied thermal engineering. 2013, Vol 58, Num 1-2, pp 173-180, issn 1359-4311, 8 p.Article

The augmentation of distillate yield by using concentrator coupled solar still with phase change materialARUNKUMAR, T; DENKENBERGER, D; AHSAN, Amimul et al.Desalination (Amsterdam). 2013, Vol 314, pp 189-192, issn 0011-9164, 4 p.Article

Thermal simulation of composite high conductivity laminated microencapsulated phase change material (MEPCM) boardDARKWA, J; SU, O.Applied energy. 2012, Vol 95, pp 246-252, issn 0306-2619, 7 p.Article

A review of intercalation composite phase change material: Preparation, structure and propertiesMIN LI; ZHISHEN WU.Renewable & sustainable energy review. 2012, Vol 16, Num 4, pp 2094-2101, issn 1364-0321, 8 p.Article

Determining the rheological behavior of octadecane as phase change material: First approachDELGADO, Mónica; GSCHWANDER, Stefan; LAZARO, Ana et al.Thermochimica acta. 2012, Vol 548, pp 81-87, issn 0040-6031, 7 p.Article

Feasibility study of an aluminum vapor chamber with radial grooved and sintered powders wick structuresCHEN, Yu-Tang; KANG, Shung-Wen; HUNG, Yu-Hsun et al.Applied thermal engineering. 2013, Vol 51, Num 1-2, pp 864-870, issn 1359-4311, 7 p.Article

Enhanced laminated composite phase change material for energy storageDARKWA, J; ZHOU, T.Energy conversion and management. 2011, Vol 52, Num 2, pp 810-815, issn 0196-8904, 6 p.Article

Heat pipe with PCM for electronic coolingWENG, Ying-Che; CHO, Hung-Pin; CHANG, Chih-Chung et al.Applied energy. 2011, Vol 88, Num 5, pp 1825-1833, issn 0306-2619, 9 p.Article

A review on effect of phase change material encapsulation on the thermal performance of a systemSALUNKHE, Pramod B; SHEMBEKAR, Prashant S.Renewable & sustainable energy review. 2012, Vol 16, Num 8, pp 5603-5616, issn 1364-0321, 14 p.Article

Study on polyethylene glycol/epoxy resin composite as a form-stable phase change materialYUTANG FANG; HUIYING KANG; WEILONG WANG et al.Energy conversion and management. 2010, Vol 51, Num 12, pp 2757-2761, issn 0196-8904, 5 p.Article

Heat transfer characteristics of microencapsulated phase change material slurry in laminar flow under constant heat fluxRUOLANG ZENG; XIN WANG; BINJIAO CHEN et al.Applied energy. 2009, Vol 86, Num 12, pp 2661-2670, issn 0306-2619, 10 p.Article

Optical response characteristics arising from delocalized electrons in phase change materialsHO, H. W; BAI, K; SONG, W. D et al.Acta materialia. 2013, Vol 61, Num 5, pp 1757-1763, issn 1359-6454, 7 p.Article

Characterization of thermal performance of a solid-solid phase change material, di-n-hexylammonium bromide, for potential integration in building materialsWHITMAN, Catherine A; JOHNSON, Michel B; ANNE WHITE, Mary et al.Thermochimica acta. 2012, Vol 531, pp 54-59, issn 0040-6031, 6 p.Article

An overview of fundamental studies and applications of phase change material slurries to secondary loop refrigeration and air conditioning systemsZHANG, P; MA, Z. W.Renewable & sustainable energy review. 2012, Vol 16, Num 7, pp 5021-5058, issn 1364-0321, 38 p.Article

Development of a novel refrigeration system for refrigerated trucks incorporating phase change materialMING LIU; SAMAN, Wasim; BRUNO, Frank et al.Applied energy. 2012, Vol 92, pp 336-342, issn 0306-2619, 7 p.Article

Effectiveness-NTU correlation for low temperature PCM encapsulated in spheresAMIN, N. A. M; BRUNO, F; BELUSKO, M et al.Applied energy. 2012, Vol 93, pp 549-555, issn 0306-2619, 7 p.Article

Phase change material cellulosic composites for the cold storage of perishable products: From material preparation to computational evaluationMELONE, Lucio; ALTOMARE, Lina; CIGADA, Alberto et al.Applied energy. 2012, Vol 89, Num 1, pp 339-346, issn 0306-2619, 8 p.Article

The shape stabilization of paraffin phase change material to reduce graphite nanofiber settling during the phase change processEHID, Ryan; WEINSTEIN, Randy D; FLEISCHER, Amy S et al.Energy conversion and management. 2012, Vol 57, pp 60-67, issn 0196-8904, 8 p.Article

Experimental investigation of tubes in a phase change thermal energy storage systemTAY, N. H. S; BELUSKO, M; BRUNO, F et al.Applied energy. 2012, Vol 90, Num 1, pp 288-297, issn 0306-2619, 10 p.Conference Paper

Building roof with conical holes containing PCM to reduce the cooling load: Numerical studyALAWADHI, Esam M; ALQALLAF, Hashem J.Energy conversion and management. 2011, Vol 52, Num 8-9, pp 2958-2964, issn 0196-8904, 7 p.Article